| | |
 | Quick Coupler(Reference #245-180)
FOR 3/4" ID HOSE. Lightweight plastic quick couplers for your coolant hoses. Sold as a set (enough for 1 hose)
24 In Stock
$29.95
|
| |
|
Quick Coupler O-Ring(Reference #245-185)
Replacement o-ring for quick coupler #245-180 above
0 In Stock
$1.50
|
|
|
Quick Coupler Adapter(Reference #245-182)
1" to 3/4" (hose) aluminum adapter for quick coupler #245-180 above.
2 In Stock
$10.00
|
|
|
 | Suspension Wheel Kit(Reference #900-17KIT)
For Asphalt and Grass - A wheel kit for mounting in a forward (front of rails) position on the rails to prevent track spearing and reduce wear and drag where the track first meets the rail. This wheel kit fits most current models (9" rail centers). 8 3/4" shaft length. 3 1/4" diameter wheels.
|
| |
2 Wheel Kit
(Reference #900-171)
$49.95 |
6 In Stock | |
3 Wheel Kit
(Reference #900-172)
$65.95 |
3 In Stock | |
4 Wheel Kit
(Reference #900-175)
$81.00 |
0 In Stock | |
3 1/4" Wheel Only
(Reference #581-943)
$16.95 |
8 In Stock | |
|
Suspension Wheel Kit(Reference #900-18KIT)
A special design for production suspensions. These wheel kits are the same as above except they feature a smaller 2 3/4" idler wheel. Arctic / Yamaha have 8 3/4" shaft length and Polaris / Ski-Doo have 8 5/8" shaft length.
|  |
| |
Single Wheel Kit
(Reference #900-181)
$35.95 | Arctic/Yamaha
0 In Stock | |
Single Wheel Kit
(Reference #900-182)
$35.95 | Polaris / Ski-Doo
0 In Stock | |
Dual Wheel Kit
(Reference #900-183)
$47.95 | Arctic / Yamaha
0 In Stock | |
Dual Wheel Kit
(Reference #900-184)
$47.95 | Polaris / Ski-Doo
2 In Stock | |
Centered Dual Wheel Kit
(Reference #900-185)
$47.95 | Arctic / Yamaha
0 In Stock | |
Centered Dual Wheel Kit
(Reference #900-186)
$47.95 | Polaris / Ski-Doo
1 In Stock | |
Triple Wheel Kit
(Reference #900-187)
$61.00 | Arctic / Yamaha
0 In Stock | |
Triple Wheel Kit
(Reference #900-188)
$61.00 | Polaris / Ski-Doo
1 In Stock | |
Quad Wheel Kit
(Reference #900-189)
$75.95 | Arctic / Yamaha
0 In Stock | |
Quad Wheel Kit
(Reference #900-190)
$75.95 | Polaris / Ski-Doo
0 In Stock | |
|
2 3/4" Wheel Only(Reference #581-945)
For wheel kits listed above
7 In Stock
$14.95
|
|
|
 | Single Suspension Wheels(Reference #900-ASW)
Wheel with rail mounting hardware
$21.95
|
| |
Single Suspension Wheel
(Reference #900-522)
$22.95 | 3 1/4" WHEEL
with rail mounting hardware
19 In Stock | |
Single Suspension Wheel
(Reference #900-180)
$22.95 | 2 3/4" WHEEL
with rail mounting hardware
4 In Stock | |
3 1/4" Wheel
(Reference #581-943(a))
$16.95 |
3 1/4" Wheel Only | |
2 3/4" Wheel
(Reference #581-945(a))
$14.95 |
2 3/4" Wheel Only | |
|
Wheel Mounting Blocks(Reference #900-520)
Custom built for Polaris Indys. Wheel mounting blocks that allow the installation of 4 1/4" idler wheels anywhere on the rail. Designed to achieve the same height as the standard wheels. Sold as a set of two mounting blocks. Order wheels separately.
9 In Stock
$26.95
|  |
| |
|
8" Drive Sprockets(Reference #8SPRKT)
10 tooth, 2.52 pitch internal drive sprockets. Perfect for asphalt racing - larger diameter rolls the track with less resistance and 1 additional tooth eliminates ratchet or slippage. Available only in center sprockets. Outers must have teeth cut off. Sold individually.
$39.00
|  |
| |
8" Drive Sprocket
(Reference #900-524)
$39.00 | 1" HEX SHAFTS
2 In Stock | |
8" Drive Sprocket
(Reference #900-525)
$39.00 | 1 1/16" HEX SHAFTS
6 In Stock | |
8" Drive Sprocket
(Reference #900-526)
$39.00 | 1 1/4" HEX SHAFTS
4 In Stock | |
|
 | Degree Wheel(Reference #08-092)
This degree wheel is manufactured from .052" thick aluminum with a 6.75" outside diameter and a 6mm center hole. The black anodized finish allows for easy-to-read increments. May also be used on 4-stroke engines to check or alter cam timing.
6 In Stock
$17.95
|
| |
|
Asphalt Racing Ski(Reference #900-544)
This aluminum ski weighs only 4 pounds and is super strong. Special for asphalt running. Billet aluminum wheels with rubber molded around the outside diameter. This wheel was designed for asphalt skis. Sold per pair. Two wheels per ski. Approved for use in NSSR & NHRA. $5 additional handling applies - reflected in price.
0 In Stock
$465.00
|  |
| |
|
Wheel for Asphalt Ski(Reference #900-549)
Wheel only for #900-544 ashapt racing ski above. Sold individually.
0 In Stock
$59.95
|
|
|
 | Air Density Gauge(Reference #725-160)
As air density changes with weather conditions, you should re-jet your carb to keep best power and sharp response. This meter will tell you when and how much to re-jet with a quick glance. No complicated math to do. Keep your motor running sharp week after week with a minimum of effort. Supplied with padded carrying case. CANNOT SHIP VIA AIR.
1 In Stock
$144.95
|
| |
|
Rad Wheel(Reference #725-162)
A handy circular slide rule that fits over the air density gauge and gives the change in jet size. Main jet range: 140 - 720. For Mikuni hex main jets.
Instructions
14 In Stock
$16.95
|  |
| |
|
 | Plastic Drag Ski(Reference #PDS-BLK)
High quality compression molded skiReduces weight - less than 2 lbs eachReduced frictionComes with standard wear bar24" long - 4" wide2" spindle widthSold per pairOrder mounting kit seperately ($29.95)Carbide runner also available - order seperately (sold per pair)ONLY AVAILABLE IN BLACK
|
| |
Plastic Drag Skis
(Reference #15881)
$161.95 | BLACK SKIS
3 In Stock
| |
Ski Mounting Kit
(Reference #15893)
$37.95 Installation Instructions | UNIVERSAL
3 In Stock
| |
Carbide Runners - Pair
(Reference #SXA-1200)
$66.95 | WOODY'S
4" - 60 DEGREE CARBIDE
2 In Stock
| |
Carbide Runners - Pair
(Reference #15903)
$52.95 | POWERMADD
5" - 60 DEGREE CARBIDE
3 In Stock
| |
Steel Runners - Pair
(Reference #15901)
$28.95 | STANDARD STEEL
2 In Stock
| |
|
 | Loop Blackout Kit(Reference #15894)
Designed for plastic drag skis above (#15881)Added area for sponsor logosEasy installation - no drillingIncludes one loop blackout
Instruction Sheet
2 In Stock
$14.95
|
| |
|
Two Piece Throttle Block(Reference #200-201)
A two piece bolt on throttle block - no need to remove the grip to install. It will pull up to 46mm. Aluminum - only available in black.
3 In Stock
$37.95
|  |
| |
|
 | Throttle Block with Lever(Reference #13594)
Same two piece bolt on throttle block as above with lever included.
0 In Stock
$47.95
|
Sold Out For The Season
|
|
Long Throw Handle Assembly(Reference #200-205A)
Aluminum with plastic lever
15 In Stock
$42.95
|  |
| |
|
Thumb Lever(Reference #200-215)
$2.95
43 In Stock |
|
Thumb lever only for above assembly
|
|
Fuel and Lube Tank Assembly(Reference #FUEL/LUBE)
Ready for hook up. Assembly includes:one quart tanksa mounting bracketcapsclampfuel line fittings
|  |
| |
Single Tank Assembly
(Reference #900-424)
$49.95 |
2 In Stock | |
Dual Tank Assembly
(Reference #900-422)
$99.95 |
0 In Stock | |
Individual Tank
(Reference #0670-065)
$25.50 |
1 In Stock | |
Tank Cap
(Reference #0670-514)
$6.95 |
3 In Stock | |
|
 | Aluminum Drag Ski(Reference #ALUMSKI)
Genuine Wahl BrosHeavy duty but lightweightDesigned and manufactured especially for drag racingISR legal26.5" long including loop$2 handling applies to each ski
|
| |
Drag Ski w/Spring
(Reference #900-125)
$117.00 | 2" spindle width4 lbs eacSold individually$2 handling reflected in price
2 In Stock | |
Runner - Standard
(Reference #900-127)
$9.95 | Sold individually
5 In Stock | |
Carbide Runner
(Reference #900-132)
$36.00 | 2" carbideSold per pair
0 In Stock | |
